Fisher & Paykel DishDrawer - Manual (Page 21)

19
o p t i o n a d j u s t m e n t m o d e
Integrated Models
1. Enter in the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until the lights above the
START/PAUSE button and the ECO button is red. If it is not, press the
POWER button to return to the Normal Operating Mode and start again.
3. Press the LOCK button to turn the Closed Drawer feature on or off. If
all the red lights on the wash program indicator are on then the Closed
Drawer feature is on.
4. Press the POWER button to return the Normal Operating Mode.
Closed Drawer On Closed Drawer Off
Prefinished Models
1. Enter the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until the letters ‘Ld’ appear on the
Electronic Display.
3. Press the LOCK button to turn the Closed Drawer Option on or off.
The brush symbol indicates the Closed Drawer Option is selected.
4. Press the POWER button to return to the Normal Operating Mode.
Electronic display
Closed Drawer On Closed Drawer Off
When the Closed Drawer Option has been selected it will keep the locked at all times. When you wish to open the
press the POWER button. When the is fully closed again, the lid will automatically come down after 30 seconds and lock the
. NOTE: If the Lock feature is used in conjunction with the Closed Drawer Option, pressing the POWER button will not open the
. The Lock feature must be turned off to enable the
to be opened.
How to Install the Closed Drawer Option
Integrated Models
This option is not available for Integrated Models. Prefinished Models
1. Enter the Option Adjustment Mode as explained previously.
2. Press the START/PAUSE button until letters “dS” appear on the
Electronic Display.
3. Press the LOCK button to turn the Clean Dish Indicator on or off.
When the Clean Dish Indicator has been turned on, the brush symbol
is present on the Electronic Display.
4. Press the POWER button to return to the Normal Operating Mode.
Electronic display
Clean Dish On Clean Dish Off
Examples of where this feature might be beneficial are when dishes have been left in the and you cannot remember if they have
been washed or in situations where household members regularly remove a few clean dishes without emptying the remaining drawer.
When the leaves the factory it is programmed with the Clean Dish Indicator off. When the wash program has finished, the “End of
Program” symbol will remain on until the is opened. Once the is opened, it will return to the Normal Operating Mode.
If the Clean Dish Indicator is chosen, the “End of Program” symbol will remain on to indicate the dishes are clean. When you have unloaded the
clean dishes or putting in dirty dishes into the
, press the POWER button. The will return to the Normal Operating
Mode, this could be used to indicate that dirty dishes are in or can be loaded into the .
NOTE: We do not recommend the Clean Dish Indicator be used in conjunction with the Closed Drawer Option.
How to Install the Clean Dish Indicator