Frymaster Dean FPHD - Manual (Page 31)

HIGH EFFICIENCY DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1-26
1.7.8 Replacing the Frypot (cont.)
22. Remove the temperature probe from frypot. (See Section 1.7.3, Replacing the Temperature
Probe: Computer–equipped Fryers, for specific instructions.)
23. Remove the high-limit from the frypot.
24. Remove bolts from brackets securing burner
manifold to frypot. Leave the manifold in
place.
25. Using a sharp knife or box-cutter, cut the
silicon seal around the frypot. Use care not
to scratch stainless steel surfaces.
Removing bolts (arrows) from burner manifold
support brackets (both sides). Leave the burner
manifold in place after removing bolts.
Cutting frypot seal prior to frypot removal.