Fisher & Paykel OR60 - Manual (Page 35)

33
A
B
Care and cleaning
Replacing the oven lamp
1 Turn the power to the cooker off at the wall.
2 Let the oven cavity and the heating elements cool down.
3 Remove the protective cover “B”.
4 Unscrew and replace the bulb “A” with a new one suitable for high temperatures (300 o C) with
the following specifications: 230-240V, 50Hz, E14 and same wattage as the bulb being replaced
(check wattage stamped on the bulb).
5 Refit the protective cover “B”.
Note: oven bulb replacement is not covered by your warranty.
Fig. 38 Removing the oven lamp
FOUR FUNC
TION MODELS
FOUR-FUNC
TION MODELS
WITH GAS C
OOK
T
O
P