FUJITSU Primecenter M1 BS2000 - Manual (Page 33)

33
Inserting mounting elements
4.6 Inserting mounting elements
4.6.1 Inserting Cage Nuts
Introduction
Cage nuts are placed into the support uprights. A special tool helps you to
mount it (see
figure 7 ).
Performing the task
Figure 7: Inserting cage nuts
Ê Insert the cage nut as shown in the figure with the bottom part of the cage
in the appropriate mounting hole of the support upright (1).
Ê Use the tool supplied to lever the upper part of the cage nut into the
mounting hole as shown (2).
The cage nut should lock into the mounting hole as shown (3).