FUJITSU Primecenter M1 BS2000 - Manual (Page 49)

49
Cable Inlets and Outlets
5.5.2 Cable routing through the top cover
The 42 HU racks offer the possibility to route cables through the top cover by
means of the brush panel kit. Two special cut-outs have been foreseen which
can be opened by cutting through the micro-joints of the cover sheet.
I
Cable routing via the cut-out without the brush panel kit is not allowed,
because cables may be damaged by sharp edges.
The following parts are delivered with the brush panel kit:
Figure 21: Delivered parts of the brush panel kit
1 Edge protector
2 Top cover brush (2x)
0
/