FUJITSU Primecenter M1 BS2000 - Manual (Page 67)

67
7 Power Distribution
The PRIMECENTER M1 19-inch rack offers various possibilities for distributing
power to the integrated rack components. Therefore only a few selected
proposals are described here. For more information, please refer to the web:
http://manuals.ts.fujitsu.com/index.php?id=5406-5605-5606
The following socket strips are currently available:
The connection conditions described in the relevant manuals for the integrated
rack components should be complied with in all cases.
Total no. of
sockets Name of socket strip Remarks
5 sockets Socket strip
3x 16 A + 2x 10 A IEC 60320 Single-phase "Blade"-PDU
10 sockets
(6x16 A + 4x10 A) PDU 50A 2U, 6x16A + 4x10A
IEC 60320 Single-phase "Blade"-PDU w/o
plug
15 sockets
(9x 16 A + 6x 10 A) Socket strip 3x3 16A +
3x2 10A IEC322 Blade-PDU with CEE plug
(3-ph./32 A red) and Fuses
24 sockets Socket strip 3-phase 3x8
sockets with CEE plug 3x16 A (red)
8 sockets Socket strip 8x 10A
IEC60320 + 32A IEC60309
plug Single-phase with CEE plug (32 A)
and Fuses
10 sockets Socket strip 1x 10 outlets +
ass. Single-phase with CEE plug (16 A)
ditto Socket strip 1x 10 outlets for
USA/CAN Single-phase with USA/CAN plug
(208 V AC)
ditto Powersocket outlet 10x
IEC6 0320 C13 for UPS Single-phase for UPS units
3 safety sockets Socket strip exp. 3 safety
plugs + ass. Single-phase PDU
4x socket 10 A +
1x safety socket Socket strip can not be mounted on PDU kit
3HU