FUJITSU Primecenter M1 BS2000 - Manual (Page 79)

79
Power Distribution
7.3.2.2 Installation options for 700 mm wide symmetrical racks
Performing the task
Ê Install the PDU brackets as described on page 69 .
Figure 47: 10-way socket strip "Blade PDU" mounted in a 700 mm wide symmetrical rack
Ê Screw the socket strip with 2 screws onto the PDU brackets.
I
Installation is possible on both sides.
Rack height Installation direction vertically Installation direction horizontally
42 HU conditionally possible
1
Max. 2x with PDU kit 3 HU
24 HU conditionally possible
1
1
Installation is only possible on the rear side. Cable routing is restricted. Installation of cable
arms at the same height is not possible.
Max. 2x with PDU kit 3 HU
Table 6: Installation options for asymmetrical racks