Frymaster COOL ZONE SERIES *8196329* User Manual

Page 20

Advertising
background image

YSCFHC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS

CHAPTER 3: INSTALLATION INSTRUCTIONS

3-7

3.4 Gas Connections (cont.)

2. For an appliance equipped with casters, the installation shall be made with a connector

that complies with the Standard for Connectors for Movable Gas Appliances, ANSI
Z21.69, or Connectors for Moveable Gas Appliances, CAN/CGA-6.16. A quick-
disconnect device that complies with the Standard for Quick-Disconnect Devices for Use
with Gas Fuel, ANSI Z21.41, or Quick-Disconnect Devices for Use with Gas Fuel,
CANI-6.9, must be used. Under no circumstances are the connector and the quick-
disconnect device or its associated piping to be used to limit fryer movement.

3. The fryer must be restrained by means independent of the flexible coupling or connector

in order to limit the movement of the fryer. Clips are located on the back panel of the
fryer for the attachment of restraints.


4. If it is necessary to disconnect the restraint, it must be reconnected after the fryer has

been returned to its originally installed position.

WARNING

Do not attach accessories to this fryer unless fryer is secured from tipping.

Personal injury may result.

F. After hook-up, bleed the gas line of air to ensure that the pilot light will ignite quickly and

evenly.

WARNING

Qualified personnel MUST perform any adaptation, modification, or gas conversion,

if required. Failure to use qualified personnel will void the Frymaster warranty.


3.5 Adjustments/Adaptation To Different Gases

A. Proper operation of appliances requires the operator to scrupulously inspect the following:

1. Gas inputs and pressures;

2. Voltage and polarities of electrical power supplies.

B. Frymaster gas fryers are manufactured to use the type of gas and pressure specified on the

rating plate. When changing gas, adaptation must be performed by qualified personnel.
Failure to use qualified personnel will void the Frymaster warranty.


Nominal "Qn" Heat Input for the YSCFH18G High Efficiency Cool Zone Gas fryer is 25 kW.

Advertising