Frymaster COOL ZONE SERIES *8196329* - Manual (Page 23)

YSCFHC18G HIGH EFFICIENCY COOL ZONE SERIES GAS FRYERS
CHAPTER 3: INSTALLATION INSTRUCTIONS
3-10
3.8 Safety Switches (cont.)
B. Other Fryer/Filter Switches
1. Drain Valve Microswitch: The computer
will display DRAIN OPEN when the
drain valve is opened. The computer will
lockout, preventing any cooking operation
until EXIT/COOL FILTER is pressed.
2.
Float-Switch: Located in the frypot.
Designed as a safety switch, it deactivates
the gas valve, preventing burner ignition
until the oil level extends above the
heating tubes.
3. High-limit Reset: Located in each fryer
cabinet under the control panel. This
switch is used to reset the high-limit if
the cooking medium has reached high
temperature safety limits. The high-limit
sensor bulb is mounted inside the frypot
between the two left-most burner tubes.
High-Limit
Probe
Temperature
Probe
Frypot Front
Float
Switch
A microswitch is located on the red handle at the
drain valve.
The hi-limit reset is accessible in the fryer cabinet
under the controller.