Faber Genie M1600 - Manual (Page 28)

26 • Installing the Genie Camera Genie Monochrome Series-GigE Vision Camera
Jumbo Frames
• Select the 'Jumbo Frames' property.
• Change the value to the largest supported by the installed NIC. The Genie can then be configured to use its
maximum Jumbo Frames size (currently 9000). In this example the NIC value is set to 9014.
GigE NIC Jumbo Frames
Running the Network Configuration Tool
Once the GigE Server discovers a device, start the Network Configuration tool to verify and modify the network
configuration of the imaging system. See
" Network Configuration Tool " on page 79 .
First verify the Genie camera appears as a child of the NIC card it is connected to. By default the Genie camera is
identified by its serial number if no user-defined name has been assigned.
Because image transfers require considerable bandwidth through the NIC, it is recommended that a separate Gigabit
Ethernet NIC for the Genie camera be used. Connections to the Internet or to a corporate network should be through
a different NIC.