Faber Genie M1600 - Manual (Page 66)

64 • Operational Reference Genie Monochrome Series-GigE Vision Camera
Acquisition Device Event Name
(case sensitive strings) Description
Start of Trigger Trigger is valid based on the programmed trigger parameters
Start of Exposure Exposure has started
End of Exposure Exposure is complete
Feature Value Changed Parameter value is changed
Feature Info Changed Configuration parameter is changed
Invalid Trigger Trigger event (software or external) was invalid
Input Event 0 External Input # 1 has received a valid signal
Input Event 1 External Input # 2 has received a valid signal
Output Event 0 External Output # 1 has changed state
Output Event 1 External Output # 2 has changed state
Transfer Event Name Description
End of frame transfer Video frame transferred to host buffer
Event Selection via GenICam Applications
GenICam features for Events:
EventSelector = {AcquisitionTrigger = 2, ExposureStart = 3, ExposureEnd = 4}
EventNotification = {Off = 0, GigEVisionEvent = 1}