FieldServer FCI 7100 Series - Manual (Page 18)

FS-8700-112 Gamewell-FCI 7100 Driver Manual Page 18 of 20
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Stat Offset Description
#define FCI_7100_STAT_RCVD_MSGS 11 Increments each time a message is received
#define FCI_7100_STAT_RCVD_BYTES 12
Increments each time a character is recieved from
the panel. The bytes are only added when a
message terminator is received. Thus this count is
equiv
to the byte count in all
FCI_7100_STAT_RCVD_MSGS
#define
FCI_7100_STAT_PARSED_NO_ERRS_EXCLD_RESET
13
Increments each time a message is parsed without
errors. Excludes Reset Messages
#define
FCI_7100_STAT_PARSED_NO_ERRS_RESET
14
Increments each time a reset message is parsed
without errors.
#define FCI_7100_STAT_PARSED_NO_ACTION 15
Increments each time a message is parsed with no
errors but the nature of the message doesnt
require data to be stored. (eg empty msg lines)
#define FCI_7100_STAT_PARSED_WITH_ERRS 16
Increments each time a message produces an
error when parsed.
#define FCI_7100_STAT_INHIBIT_RESET 17 Set to 1 to inhibit resets altogether
#define FCI_7100_STAT_INHIBIT_RESET_DA_PUT 18 Set to 1 to inhibit resets from clearing arrays
#define FCI_7100_STAT_INHIBIT_RESET_WHILE 19
Set to 1 to inhibit reset function from looping thru
MD's
#define FCI_7100_STAT_NODE_INFO_MSG 20
Increments each time a message with node
information is received
#define
FCI_7100_STAT_NO_PLACE_TO_STORE_NODE
21
Increments each time an event needs to be stored,
the event contains node info and the node cannot
be found so there is no match and the message
was discarded.