Faria Instruments PILOT IS0152 - Manual (Page 11)

Setting the clock:
Press and hold the “MODE” button until
the Pilot beeps to select the Edit Mode.
Press the “Up” or “Down” arrow keypads
once to set each minute.
Press and hold the “Up” or “Down” arrow
keypads to set the hours. (The minutes
will continuously advance in 10-minute
intervals to change the hours.)
Lower Display Functions
Speedometer
Description:
The Speedometer gives digital readings in
either Statue Miles per Hour or Nautical
Miles per Hour (knots). Readings are
accurate up to 58 MPH (50KTS) in 0.1
increments. Speed calibration can be
performed at any speed by setting the
speedometer reading to match GPS, radar
gun, time distance run etc. The Distance
Log reads in either Statue Miles or
Nautical Miles in 0.1 increments
depending upon which unit type is
selected for the Speedometer or Log.
(Setting units in either function sets the
units for both). Distance Log calibration
can also be performed by setting the Log
reading to match a GPS or charted
distance run. Calibrating the distance Log
also automatically calibrates the
Speedometer. (The longer the distance the
more accurate the calibration.)
Operation:
Selecting the Speedometer Function:
Press the “MODE” button and activate the
Select Mode.
Press the “Down” arrow to select the
lower display.
Continue pressing the “MODE” button
again until the Function Indicator is
pointing to either MPH or KTS.
(The Function Indicator will automatically
point to the last unit type selected. You are
now in the Speedometer function.)
Quick Press
Press and hold
Minutes:
Hours:
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
Page 9