Faria Instruments PILOT IS0152 - Manual (Page 7)

If no buttons are pushed within 5 seconds,
the Pilot will revert automatically to the
Normal Mode.
You can also enter the Edit Mode while in
the Select Mode. The Pilot display will
then stop flashing (Select Mode)
indicating the change to the Edit Mode.
(The operation of various edit modes will
be separately explained for each function
throughout the manual.
Upper Display Functions
Depth Sounder:
Description:
Depending on the bottom conditions the
depth finder will read to 300 feet or the
corresponding number of meters or
fathoms to the nearest 1/10th (0.1).
NOTE: A 600 ft. Triducer is also
available.
The depth finder has an audible and LCD
displayed depth alarm with adjustable
shallow and deep limits and a depth below
keel offset feature. These settings once
made are stored in memory and will
remain even if the battery is disconnected.
Operation:
Selecting the Depth Sounder Function:
Press the “MODE” button and activate the
Select Mode.
Press the “Up” arrow to select the upper
display.
Continue pressing the “MODE” button
again until the Function Indicator is
pointing to FT, M or FA.
(The Function Indicator will automatically
point to the last unit type selected. You are
now in the Depth Finder function.)
Selecting the Depth Sounder Units.
Press and hold the “MODE” button until
the Pilot beeps to select the Edit Mode.
Continue pressing the “MODE” button
quickly until the upper display reads “Un”
(units).
Press the “Up” or “Down” arrow button to
move the function indicator to the desired
units either Feet (F), Meters (M) or
Fathoms (FA).
Depth alarms:
When the shallow depth setting is read by
the depth sounder, the Function Indicator
Page 5
S
KL
D
F
FA
M
S
KL
D
F
FA
M