Faria Instruments PILOT IS0152 - Manual (Page 9)

Press and hold the “MODE” button until
the Pilot beeps to select the Edit Mode.
Continue pressing the “MODE” button
quickly until the Function Indicator points
to the “KL” indicating the keel offset
function.
Press and hold only the “Down” arrow key
pad to adjust the reading to the desired
depth. A minus sign (-) will appear to the
left of the setting.
Loss of Signal (SIG):
If the signal is lost due to depths below
300 feet, depths above 2 feet or a
disconnected or broken cable, the
characters (SIG) will appear in the upper
display signifying loss of signal. (It will
look like 516)
If the upper display depth sounder
function is active the (SIG) will illuminate
and hold. If any other upper display
function is active the (SIG) will flash on
and off alternately with the active
function’s readout.
Timer:
Description:
The timer operates simultaneously in
hours, minutes and seconds. The timer is
viewed in the Normal Mode as either
hours and minutes the left hand (T1), or
minutes and seconds the right hand (T1).
Operation:
Selecting the Timer Functions.
Press the “MODE’’ button and activate the
Select Mode.
Press the “Up” arrow to Select the upper
display.
S
KL
D
F
FA
M
S
KL
D
F
FA
M
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
Page 7