Faria Instruments PILOT IS0152 - Manual (Page 6)

Selecting upper or lower active display:
Activate the Select Mode and while the
display is flashing, press the “Up” arrow
to select the upper display as active
or the “Down” arrow to select the
lower display as the active display.
Selecting display function, (moving the
Function Indicator):
When in the Select Mode in the desired
active display and while the display is
flashing press the “MODE” button quickly
again. The Function Indicator will move
from function to function around the
selected active display and the Pilot will
beep each time the “MODE” button is
pressed.
Stop at the desired function.
Edit Mode:
The Edit Mode allows you to set the
following:
Depth Sounder: shallow alarm, deep
alarm, keel offset, scale units (feet,
fathoms or meters).
Timer: reset to zero.
Clock: hours and minutes.
Distance Log: reset to zero, speed scale
units (miles per hour or knots,) calibrate
speed and distance (statute miles or
nautical miles).
Thermometers air and water: scale
units (Fahrenheit or Centigrade).
Selecting the Edit Mode:
When the desired display function is
selected, press and hold the “MODE”
button until the Pilot beeps. The Edit
Mode will activate.
Page 4
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH