Faria Instruments PILOT IS0152 - Manual (Page 14)

T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
Press either the “Up” or “Down” arrow
button to clear the Log reading to zero.
Water & Air / Bait-well
Temperature
Description:
The Pilot I will monitor water surface
temperature. The (Setting units Fahrenheit
(F), or Centigrade (C), in either function
sets the units for both). (A second
temperature, either air or bait-well may be
monitored when the unit is equipped with
the optional sender.)
Operation:
Selecting the Air / Water Temperature
Function
Press the “MODE” button and activate the
Select Mode.
Press the “Down” arrow to Select the
lower display.
Continue pressing the “MODE” button
again until the Function Indicator is
pointing to either the upper icon (Air/Bait-
well Temp.) or the lower icon (Water
Temp.)
Selecting the Air / Water Temperature
Units
Press and hold the “MODE” button until
the Pilot beeps to select Edit Mode.
Continue pressing the “MODE” button
quickly until the lower display reads “Un”
(units).
Press either the “Up” or “Down” arrow
button to move the Function Indicator to
the desired units either Fahrenheit (F) or
Centigrade (C)
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
Page 12