Faria Instruments PILOT IS0152 - Manual (Page 16)

Press the “MODE” button.
The upper display changes to “bAtH” and
the lower display shows the current high
voltage warning setting.
Press either the “Up” or “Down” arrow
button to adjust the high voltage alarm
setting.
Bar Graph Display
Function
Description:
The bar graph provides a continuous
display of the battery system voltage
supplied to Pilot I. Each element of the
bar graph represents one (1) volt. Voltages
from 10.5 vDC to 17.5 vDC are displayed.
Five elements active, 13.5 - 14.5 vDC, is
usually considered normal for a properly
operating system with the engine running.
Please check your owners manual and
battery instructions for further
information concerning “normal” voltage
readings for your installation.
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
Bar Graph Display
Page 14