Faria Instruments PILOT IS0152 - Manual (Page 15)

Voltmeter:
Description:
The Voltmeter continuously monitors the
battery system voltage supplied to the
Pilot I. The Voltmeter has a user adjustable
low and high voltage alarm feature. If the
12 vDC power drops to below the user
adjustable low voltage setting or rises
above the user adjustable high voltage
setting, the voltage alarm activates. The
lower display will change to the Voltmeter
Function. The LCD will flash while
displaying the current voltage and the
Pilot I will Beep every 15 seconds to warn
of a low or high voltage condition. The
default settings for the alarms are 12 vDC
(low voltage) and 16 vDC (high voltage).
Please check your owners manual and
battery instructions for further
information for these settings.
Selecting the Voltmeter Function:
Press the “MODE“ button and activate the
Select Mode.
Press the “Down” arrow to select the
lower display.
Continue pressing the “MODE” button
again until the display shows 00.0 and no
other Lower Display Function Indicator is
active except the one pointing to the
Battery icon.
Setting the Voltage Alarms
Press and hold the “MODE” button until
the Pilot I beeps to indicate Edit Mode is
selected.
The upper display indicates “bAtL” and
the lower display shows the current low
voltage warning setting.
Press either the “Up” or “Down” arrow
buttonto adjust the low voltage alarm
setting.
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
T 1 T 1
S
KL
D
F
FA
M
DIS
KTS
MPH
Page 13