Operation and maintenance guidelines – FMI (V)G42H/50H User Manual

Page 14

Advertising
background image

www.fmiproducts.com

109493-01R

14

WARNING: Fireplaces

equipped with glass doors

should be operated only with

doors fully opened or doors fully

closed. Doors, if left partly open,

may draw gas and flame out of

the fireplace opening creating

risks of both fire and smoke.

Cleaning Glass

Clean glass with any commercial glass

cleaner or soap and water. Do not use any

abrasive material to clean glass. Do not clean

glass with any cool water if glass is still hot

from the fire and smoke.
A gas line or gas log lighter may be installed

for the purpose of installing a vented or vent-

free decorative gas appliance incorporating an

automatic shutoff device and complying with

the Standard for Decorative Gas Appliances

for Installation in Vented Fireplaces, ANSI

Z21.60 or American Gas Association draft

requirements for Gas Fired Log Lighters for

Wood Burning Fireplaces, Draft NO. 4 dated

August, 1993.
If you wish to install an unvented (vent-free)

gas log set, only unvented gas log sets which

have been found to comply with the standard

for unvented room heaters, ANSI Z21.11.2 are

to be installed in this fireplace.

OUTSIDE AIR AND DAMPER

HANDLE OPERATION

The damper handle, which opens and closes

the damper blade, is located in the upper front

face of the fireplace. Pushing the handle for-

ward and up through the keyway slot will free

damper blade to automatically open. Pushing

the handle forward and down will lock damper

blade closed (see Figure 25).
The outside air kit lever is located at the left

and right hand sides of fireplace (see Figure

26). Lifting lever up will free the outside air

door to open. Pulling lever down will lock

the door.

operaTion and MainTenance guidelines

Continued

Figure 25 - Operating Damper Handle

Damper

Weight

To Close

Damper

To Open

Damper

Damper

Weight

Open Position

Closed Position

Figure 26 - Outside Air Kit Lever

WARNING: Risk of fire!

Replace grate with FMI PROD-

UCTS, LLC model 109496-01

(42" Models) or 109496-02 (50"

Models) grate only. This grate

has been designed to keep the

operation of your fireplace safe

and efficient.

Advertising
This manual is related to the following products: