Faria Instruments MG2000 - Manual (Page 12)

1 Display
Next
Screen
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select this screen as the “default screen” and
exit.
Press “Up” or “Down” to select another screen.
Repeat until desired “Default Screen” is selected.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Reset “Fuel Used”
1 Reset
Fuel
Used
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to reset “Fuel Used” to zero (0).
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Set “Fuel Tank Full”
1 Set
Fuel Tank
Full
2
3
NOTE: In order to use the “Fuel Left” function, the owner
must set this function when the fuel tank is filled or use
the set current amount of fuel below. In addition, if “Set
Fuel Tank Full” function is used, the “Fuel Tank Size”
must be set correctly to the size of the fuel tank in this
application. The computer will monitor fuel usage and
calculate the fuel left in the tank. This function does not
replace the fuel level function provided by the fuel sender
and should be used with caution.
Press and hold the “Up” and “Down” buttons for 2
seconds to set “Fuel Tank Full.”
Automatically sets the fuel available to the tank size
selected by the user and returns to “Edit” mode.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Page 8