Faria Instruments MG2000 - Manual (Page 17)

Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold the “Up” and “Down” buttons for 2
seconds to save the selection and return to the “Edit”
mode.
1 > USA
240 – 33 ohm
EU
10 – 180 ohm
Centroid
2
3
4
5
6
Press “Up” or “Down” to select another function or
“Mode” to return to the “Normal” mode.
Select “Oil Pressure Sender”
1 Select
Oil Pressure
Sender
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Oil Pressure Sender.”
Press “Up” or “Down” to select another function.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold the “Up” and “Down” buttons for 2
seconds to save the selection and return to the “Edit”
mode.
1
60 PSI
80 PSI
100 PSI
2
3
Press “Up” or “Down” to select another function or
“Mode” to return to the “Normal” mode.
Select “Display Units”
1 Select
Display
Units
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Units.”
Press “Up” or “Down” to select another function.
Select “Pressure Units”
1 Select
Pressure
Units
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Pressure Units.”
Press “Up” or “Down” to select another choice of
“Units.”
Page 13