Faria Instruments MG2000 - Manual (Page 22)

This screen will display for 10 seconds.
The horn will sound three times.
The warning lights will flash three times.
The backlights will flash three times.
1 The
Self
Test
Mode
Is in
Operation
2
3
4
5
6
When “Self Test” is complete the unit will return to the
“Edit” mode.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Page 18
Available Functions for Display in MG2000 ALDL Tachometer Screens
The functions listed below can be displayed in the user configurable screens. All of
the functions may not be available in your installation. If a function is selected for
display and that function does not appear on the screen, the function does not exist
in this installation.
A function is selected for display by selecting “Organize User Screens” in “Edit”
mode.
1. System voltage
2. Oil Pressure
3. Coolant temperature (Engine Temp)
4. Engine hours
5. Fuel remaining based on usage and tank volume when filled (Fuel Left)
6. Fuel used since last reset (Fuel Used)
7. Fuel consumption rate (Fuel Inst)