Faria Instruments MG2000 - Manual (Page 15)

Press and hold the “Up” and “Down” buttons for 2
seconds to select “Oil Pressure Dial.”
Press “Up” or “Down” to select another “Gauge Range.”
Press “Mode” to return to the “Edit” mode.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold the “Up” and “Down” buttons for 2
seconds to save the selection and return to “Gauge
Range” selection
1
> 60 psi
80 psi
100 psi
2
3
Select “Coolant Temperature Dial”
1 Select
Coolant Temp
Dial
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Coolant Temp Dial.”
Press “Up” or “Down” to select another “Gauge Range.”
Press “Mode” to return to the “Edit” mode.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold the “Up” and “Down” buttons for 2
seconds to save the selection and return to “Gauge
Range” selection.
1
> 60 –220 f
100 – 250 f
2
3
Select “Voltmeter Dial”
1 Select
Voltmeter
Dial
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Voltmeter Dial.”
Press “Up” or “Down” to select another “Gauge Range.”
Press “Mode” to return to the “Edit” mode.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow,
Press and hold the “Up” and “Down” buttons for 2
seconds to save the selection and return to “Gauge
Range” selection.
1
> 16 v
32 v
2
3
Page 11