Faria Instruments MG2000 - Manual (Page 8)

Displays the Engine Hours data received
from the engine ECU.
Default screen “4”
This screen displays fault conditions
based on engine data received from the
ECU or alarms based on internally set
alarm points. Engine alarms from the
ECU will be displayed as “Check Engine
!”
or “Engine Emergency Stop !”.
Accessing the “View“ mode when the
Alarm screen appears will allow more
information to be displayed about the
alarm if provided by the engine.
Internal alarm values can be set for “Low
Fuel” and other functions. Alarms for
these settings will appear as required.
LCD Display Screens:
In “Normal” mode, press “Mode” once to
enter screen “Select” mode, press “Up”
or “Down” to move between screens.
Press “Mode” once to return to “Normal”
mode.
Screen “1”
Screen “2”
Screen “3”
Screen “4”
Alarms (ONLY IF
ALARMS ACTIVE)
Figure 2
Page 4