Faria Instruments MG2000 - Manual (Page 21)

Page 17
Press and hold the “Up” and “Down” buttons for 2
seconds to save “Full Tank” calibration and exit.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Select “Low Fuel Alarm” setting
1 Low
Fuel
Alarm
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Low Fuel Alarm.”
Press “Up” or “Down” to select another function.
Adjust low fuel alarm setting.
1 Low
Fuel
XX.X
2
3
Press “Up” or “Down” to set desired “Low Fuel Alarm”
setting. Line 3 value will adjust.
Press and hold the “Up” and “Down” buttons for 2
seconds to save “Low Fuel Alarm” and exit.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Select “Software ID and Revision”
1 Software Id
and
Revision
Minigateway
- Rev -
2
3
4
5
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Select “Self Test”
1 Select
Self
Test
2
3
Press and hold the “Up” and “Down” buttons for 2
seconds to select “Self Test.”
Press “Up” or “Down” to select another function.