Fostex CR300 - Manual (Page 21)

21
CR300 <PRB1291-A>
This function is for recording of digital output of other digital source than CD, DAT, MD and DCC.
(It is recommended to use the automatic digital-source synchro recording when recording signals from a CD, DAT, MD or DCC.)
MANUAL DIGITAL-SOURCE RECORDING
3
5 6
2 1
REPEAT
FADER TRACK NO.
WREITE
REC
• After loading the disc, check that
the CD-R or CD-RW indicator
stops blinking and starts to light
steadily.
In case it does not light steadily ,
refer to page 42.
• Press the PAUSE ( ) or PLAY
( ) buttons after the counter
displays "00:00".
1
Load a CD-R or CD-
RW disc containing
a recordable space.
For a disc loading, refer to
page 15.
2
ANALOG DIGITAL
INPUT SELECTOR
OPT
AES /
EBU
LINE
COAX XLR / -10
XLR / +4
•
•
•
•
•
•
Label side
Press the pause ( ) or
p l a y ( ) b u t t o n i n
record-pause mode.
or
5
3
Start playing the source
player to confirm whether
recording of that source is
possible.
4
Press two buttons
together.
Press the RECORD
(REC ) button(s).
• This unit enters record-
pause mode.
• Check the copy bit indicator
(refer to page 24).
6
After recording, press the stop
( ) button to end recording.
• "PMA REC" is displayed and the unit
stops after recording the track data.
or
Set the INPUT SELECTOR
to DIGITAL.
Select the digital input to be recorded.
AES/EBU or OPT or COAX
• Track numbers are automatically updated
when the AUTO TRACK indicator is on.
• In recordings of CD, MD, DAT, DCC and
other digital sources(S/P DIF only), track
numbers are automatically updated
based on start-ID and / or track number
included in the digital signal information.
• AES/EBU digital signal or digital signal
from media such as BS (satellite broad-
casting) that contains no track number
information are recorded in the same
way as analog source.
• Track numbers are automatically updat-
ed if the following signal is input after 2-
seconds of ”no signal” condition.
• In the case of digital source input, the
CR300 detects the signal less than -
90dB as ”no signal”. Track numbers are
automatically updated if the signal level
exceeds this level.
• Therefore recordings of classical music
and other music styles with long silent
passages will be recorded on more tracks
than required. Turn off the auto track
function and create new tracks manual-
ly to avoid this problem.