Fostex CR300 - Manual (Page 34)

34
CR300 <PRB1291-A>
Load a CD-RW disc which has
been recorded on.
For a disc loading, refer to page 15.
C. All tracks erasing
Label side
1
2
Press the ERASE button twice
(once to start last track erasing or
TOC erasing).
• The function indicator blinks in orange indicating that the
recorder is in all tracks erase standby mode.
3
• During All tracks erasing of a CD-RW disc that has not be finalized, "ALL", "TRACK" and
"ERASE" blink successively.
• During All tracks erasing of a finalized CD-RW disc, "ERS * : ** " while the remaining time
is displayed.
Press the pause ( ) button to start
the all tracks erasing.
• The recorder stops when All tracks erasing is completed.
• All tracks erase is completed in several
seconds for a CD-RW.
D. All disc erasing
(takes recordable time plus 5 minutes)
Press and hold the ERASE button
for about 4 seconds.
• The display panel displays "ALL," "DISC," "ERASE?" and "dE ** : ** " successively.
Then the function indicator blinks in orange indicating that the recorder is in the All disc
erase standby mode.
3
• The function indicator lights in orange and
All Disc Erasing starts.
• During All disc erasing, "dE ** : ** " while the remaining time is displayed.
Press the pause ( ) button to start
the all disc erasing.
• The recorder stops when All disc erasing is completed.
1
2
• You can stop the erase process by
pressing the Stop ( ) button for 10
s e c o n d s . H o w e v e r , i f t h e e r a s e
operation is stopped, the message
"CHECK", "DISC" appears to indicate
that the disc has not been normally
erased.
• The function indicator lights in orange and
All Tracks Erasing starts.
In the case of a CD-RW which has not been finalized, do not allow more than 8 seconds to
elapse after step 2 has been performed before proceeding with step 3.
Load a CD-R or CD-RW disc which
has been recorded on.
For a disc loading, refer to page 15.
Label side
3 2 1
Function indicator
REPEAT
FADER TRACK NO.
WREITE
REC
ERASING (CD-RW ONLY)