Fostex CR300 - Manual (Page 41)

41
CR300 <PRB1291-A>
CHARACTER MESSAGE LIST
Ref. Page
page 15
page 15
page 18
page 19
page 18,
page 19,
page 20
page 16
page 16
page 17,
page 18, page 19,
page 21, page 22
page 38
page 29
page 30
page 33
page 33
page 34
page 34
Message
OPEN
CLOSE
“SET” “UP”
“TOC” “READ”
1-SYNC
AL-SYNC
“CAN NOT” “SYNC”
MONI
“INPUT” “CD”
(MD, DAT, DCC)
“PMA REC”
“TRACK ?”
“SKIP” “SET?”
“SKIP” “CLEAR?”
“LAST” “TRACK”
“ERASE?”
“TOC”
“ERASE?”
“ALL” “TRACK”
“ERASE?”
“ALL” “DISC”
“ERASE?”
Description
The tray is being opened.
The tray is being closed.
The unit is performing initial setup for recording. Please wait a while.
The unit is reading the TOC of the disc. Please wait a while.
The unit is standing by for 1-track automatic digital recording. The recording
will start in synchronism with the start of the player.
The unit is standing by for all-track automatic digital recording. The recording
will start in synchronism with the start of the player.
This display will appear when the DIGITAL SYNCHRO button is pressed if the
INPUT selector is set for an analog source, or even in digital mode, if the
source selected is other than a CD, Mini Disc, DAT, or DCC (S/P DIF only).
The unit is monitoring the input selected with the input selector.
The unit displays the source it is monitoring (for CD, MD, DAT, and DCC).
(S/P DIF only)
Temporary TOC data is being recorded in the disc's PMA (Program Memory
Area).
Never turn off the power while this display is showing.
The current operation is the track programming operation.
Select a track with the numeric buttons or or button.
The current operation is the track skip setting operation.
If you want to skip a track, select it with the SKIP ID SET button.
The current operation is the track skip clear operation.
If you want to clear the skip designation of a track, select it with the SKIP ID
CLEAR button.
Erases the last track.
If you want to erase the last track, press the pause ( ) button.
Erases the TOC (initializing it).
If you want to erase the TOC, press the pause ( ) button .
Erases all tracks.
If you want to erase the all tracks, press the pause ( ) button .
Erases the entire disc (initializing it).
If you want to erase the disc, press the pause ( ) button.
In addition to above, other character messages are also displayed as the unit detects troubles during use.
For other character messages than above, refer to “Self-diagnostics” on page 42.