Fostex CR300 - Manual (Page 30)

30
CR300 <PRB1291-A>
CAUTION:
Skip IDs cannot be cleared with CD discs or finalized CD-R, CD-
RW discs.
To clear the skip ID,
press the SKIP ID
CLEAR button again.
Skip IDs can be cleared from other tracks
by repeating steps 2 to 4 for each of them.
After having cleared the
required skip IDs, press the
OPEN/CLOSE button.
Press the SKIP PLAY
button to turn the
SKIP ON indicator off.
B. Clearing skip ID of a track
Turn SKIP ON indicator off.
5
1
2
3
4
6
Play the track which
is not to be skipped.
Select it with the numeric but-
tons of the remote control unit
or a track search button .
"SKIP" and "CLEAR?" are
displayed alternately.
• To cancel the clearing mode, press the
play ( ) button or SKIP ID SET button.
• When the button is pressed to remove
the disc, the skip ID clear data is
recorded on the disc. At this time, and
blinks "OPEN" is displayed for a few
seconds, and the tray opens after the
skip ID clear data has been recorded.
During playback of
the track which is
not to be skipped,
press the SKIP ID
CLEAR button.
• When the track search button ( or
) is pressed while "SKIP" and
"CLEAR?" are displayed, tracks to
which the skip IDs are set will be played
in order of track numbers.
• T h e s e l e c t e d t r a c k s p l a y b a c k
repeatedly.
• If you press the SKIP ID CLEAR button
during playback of a track without a
skip ID, the unit searches for the next
track with a skip ID (or it returns to the
beginning if there is no next track) and
starts playback.
• With a CD-R or CD-RW disc which does
not contain skip IDs, the SKIP ON
indicator will not light even when the
SKIP PLAY button is pressed
.
• If skip IDs have already been set, the
SKIP indicator lights on the display.
Lights.
3,4 6
2
1
SKIP ID SET
1 2 3
4 5 6
7 8 9
10 10 TIME
REPEAT
FADER TRACK NO.
WREITE
REC
SKIP ID RECORDING