Furuno CH-270 - Manual (Page 21)

2-1
2. HORIZONTAL MODE
2.1 Operational Overview
The figure below shows the typical horizontal mode operating sequence.
GAIN SECTOR TRAIN RANGE TILT
MAIN
SUB
FULL
HALF
FAST
SCAN
BRILL TARGET MENU
R/B EVENT
CUSTOM MODE DISPLAY MODE
POWER
XDR
2. Lower the
transducer.
9. Adjust gain.
6(a). Set scanning sector.
7. Set center bearing of train
sector.
5. Set range.
8. Set tilt angle.
3. Adjust screen
brilliance.
6(b). Select training sector for
full circle.
4. Select appropriate
horizontal mode.
10. Measure range and
bearing to target with cursor.
11. Adjust menu settings
(ex. TVG) as required.
1. Turn on the power.
Control unit