Furuno CH-270 - Manual (Page 5)

iii
CAUTION
Do not exceed 20 knots when operating
the equipment and do not exceed 15
knots when lowering or raising the
transducer.
The transducer shaft may become
damaged.
Do not use the equipment for other
than its intended purpose.
Wrongful use of the equipment may result
in personal injury or damage to the
equipment.
TFT LCD
The high quality TFT (Thin Film Transistor)
LCD displays 99.99% of its picture ele-
ments. The remaining 0.01% may drop out
or light, however this is an inherent property
of the LCD; it is not a sign of malfunction.
CAUTION
WORKING WITH THE SONAR OIL
Precautions
Q Keep oil away from eyes. Wear pro-
tective goggles when working with the oil.
The oil can cause inflammation of the
eyes.
Q Do not touch the oil. Wear protective
gloves when working with the oil. The
oil can cause inflammation of the skin.
Q Do not ingest the oil. Diarrhea and
vomiting may result.
Q Keep the oil out of reach of children.
Emergency procedures
Q If the oil enters eyes, flush with clean
water about 15 minutes. Consult a
physician.
Q If the oil is ingested, see a physician
immediately.
Q If the oil contacts skin, wash with soap
and water.
Disposal of oil and its container
Dispose of oil and its container in accord-
ance with local regulations. For further
details, contact place of purchase.
Storage
Seal container to keep out foreign material.
Store in dark, cool place.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Name: Warning Label (1)
Type: 86-003-1011-0
Code No.: 100-236-230
DISPLAY UNIT,
TRANSCEIVER
UNIT
WARNING
Moving shaft can pinch and cut.
Keep hands clear while operating.
Lockout power before servicing.
Name: "Finger Catch"
Warning Label
Type: 06-021-4015-0
Code No.: 100-281-590
HULL UNIT
Warning labels are attached to the
display, transceiver and hull units. Do
not remove the labels. If a label is
missing or illegible, contact a FURUNO
agent or dealer.
WARNING LABELS