3 short-cut menu, preset menu, 1 choosing short-cut or preset – Furuno CH-270 User Manual
Page 87
5. MENU OPERATION
5-3
5.3 Short-cut Menu, Preset Menu
These menus program the CUSTOM MODE keys [1], [2] and [3]. The menu to use may
be chosen with CUSTOM KEY on the SYSTEM SETTING 1 menu.
Short-cut key: One-touch activation of the operator-selected dialog box.
Preset key: One-touch setup of mode, sector, train, range, tilt and scan speed. Below
are the default settings for PRESET.
Custom mode key default settings for PRESET
CUSTOM MODE key
Display Mode
Sector
Train
Range (m) Tilt
Speed
Key 1
Horizontal
Expansion
240
°
0
° 160
30
° Fast
Key 2
Horizontal
360
°
0
° 160
30
° Fast
Key 3
Vertical Scan
180
° 90° 120 90° Fast
5.3.1 Choosing short-cut or preset
1. Press the [MENU] key to open the menu.
2. Press ▲ to choose MENU, and then press ► to choose SYS.
NO
YES
: SELECT
: CHANGE
MENU: END
GO TO SYS MENU
MENU
COM1
HORZ
VERT
ES
PRESET
COM2
SYS
Display for opening system menu
3. Press ▼ to choose GO TO SYS MENU.
4. Press ◄ to choose YES.