Fostex FD-4 - Manual (Page 21)

21
Names and Functions
REMAIN
SETUP
COMPLETED !
SURE ?
MTC OFFSET
PGM
TEMPO
VARI PITCH
44.1kHz
MTC IN
LOC
DIGITAL
S L AV E
M I D I
M T C
ABS
MTC
REMAIN ABS
LOC MTC IN
VARI PITCH TEMPO PGM
44.1kHz
SETUP MTC OFFSET
?
BAR
S M H
CLK
DF
MB
SF
SURE COMPLETED !
DRIVE
AUTO A.PUNCH
SYNC OUT
MTC
MIDI
DIGITAL
SLAVE
SYNC OUT
DRIVE
AUTO
A.PUNCH
%
MB
H, M, S, F, SF
BAR, , CLK
ABS
44.1kHz
S M F
DRIVE
AUTO A.PUNCH
SYNC OUT
PGM
CLK SCSI
44.1kHz
BAR CLK
DRIVE
AUTO A.PUNCH
SYNC OUT
PGM
CLK SCSI
44.1kHz
M
DRIVE
AUTO A.PUNCH
SYNC OUT
PGM
CLK SCSI
MTC H S F
Preset display
The display below shows all preset items for explanation
purposes.
Display examples for Time Base selected via the
TIME BASE SEL key
You can use the TIME BASE SEL key to select ABS, BAR/
BEAT/CLK, or MTC as Time Base. The following examples
show the displays when you select a Time Base at the
beginning of the disk of Program 1.
Lights up when ABS is selected as Time Base.
Lights up when MTC is selected as Time Base.
Lights up to indicate available recording time and
space on the disk.
Lights up when the FD-4 enters SETUP mode.
Lights up when an edit operation (copy, move,
paste, or erase) is completed.
Lights up to confirm or cancel the operation when
you are making settings or edits.
Lights up when the MTC Offset menu is selected
in SETUP mode.
Lights up to indicate the current Program number.
Lights up when the tempo setting menu is selected
in SETUP mode.
Lights up when Vari Pitch mode is turned on.
Indicates a sampling rate of the corresponding
Recording mode. It does not light up when the disk
is formatted in Normal mode.
Lights up to indicate that MTC is input from an
external MIDI device to the FD-4.
Lights up when the FD-4 enters locate point (edit
point) edit mode.
Lights up when the digital input track settings are
made in SETUP mode and the FD-4 is receiving
digital signals correctly. However, if the FD-4 is not
receiving digital signals correctly, or if there is a
connection problem, this indicator flashes.
Flashes when Slave mode in SETUP mode is turned
on. When a signal is locked, the flashing indicator
lights up steadily.
Lights up when the FD-4 is receiving effective MIDI
messages (MMC or FEX) from an external device.
Lights up when the FD-4 receives MTC (MIDI Time
Code) from an external device.
Lights up when the FD-4 enters Vari Pitch data edit
mode.
Indicates available disk space on the disk in
megabytes when the REMAIN indicator appears.
Lights up to indicate a time value when ABS or MTC
is used as Time Base.
Lights up to indicate a bar/beat/clock value when
BAR/BEAT/CLK is selected as Time Base.
Indicates a Program title, edit parameters, and
SETUP mode parameters.
Indicates the “SYNC OUT settings” in SETUP
mode.
Indicates the AUTO PLAY/AUTO RTN mode
settings.
Indicates the current drive. Usually, [SCSI] lights
up.(*)
Indicates the AUTO PUNCH mode settings.
Time Base is ABS.
Time Base is BAR/BEAT/CLK.
Time Base is MTC.
The level meter shows the recorder output level and the
recording level for tracks 1~4 and stereo bus L, R.
(*) When the FD-4 has the optional 2.5 inch internal IDE hard disk installed, and an
external SCSI drive is not connected, [IDE] will be lit. However, even though an
internal hard disk has been installed, if the external SCSI drive is connected, the SCSI
drive will have priority and [SCSI] will be lit.