Frymaster YFPRE1817E - Manual (Page 18)

YFPRE18E ELECTRIC FRYER
CHAPTER 4: BUILT-IN FILTRATION
4-3
4.2.1 Assembling the Filter (cont.)
Assemble the filter as follows:
1. Place the support grid in the bottom of filter pan.
2. Place the filter pad on top of the grid, encircling
the pick-up tube with the notch in the filter pad.
3. Position the hold-down ring on top of the filter
pad. The notch goes around the pick-up tube.
4. Place the crumb screen in the filter pan. Allow
the crumb screen to rest on the top edges of the
hold-down ring.
5. Place filter pan cover onto the filter pan
assembly. Ensure the front cover is correctly
positioned over the slip fitting.
Support grid properly placed in filter pan.
The hold-down ring is shown resting on the
filter pad. The notches in both are turned
toward the pick-up tube.
The filter pan is shown with the pad, hold-down
ring and crumb tray in place.