Furuno SC-60 - Manual (Page 27)

2. INSTALLATION
2-13
The reference direction is as shown below. The mounting method is the same as
that for mounting on the deck.
Bow
Stern Stern
Stern Stern
Port Starboard
Mounting Method: Underside of
desk
Mounting Direction: A Mounting Method: Underside of desk
Mounting Direction: B
Mounting Method: Underside of desk
Mounting Direction: C
Mounting Method: Underside of desk
Mounting Direction: D
Bow
Port Starboard
Bow
Port Starboard
Bow
Port Starboard
Name plate (other side)
Connectors
Reference Direction
POWER switch
(power lamp)
Processor Unit, rear view
Mount processor unit so
reference direction is
within
± 2.5
°
of
fore-and-aft line.
DIRECTION "A" DIRECTION "B"
DIRECTION "C" DIRECTION "D"
Processor unit orientation, installation on the underside of a desk
Mount the processor unit on a level surface with its name plate facing the bow,
stern, port or starboard.