Furuno SC-60 - Manual (Page 36)

2. INSTALLATION
2-22
2.7 Connection of External Equipment
All external equipment are terminated on the rear panel of the processor unit.
BEACON
EXT DISPLAY LOG/ALARM HDG IN NAV OUT
ANT GPS ANT
1
1
2
2
3
HDG OUT
1 2
4
3
12-24 VDC
Output: Plotter, Radar in
NMEA 0183 (IEC 61162)
Cable: MJ-A6SPF0012-100 (option)
Input: External DGPS Beacon
Receiver in RTCM SC-104 Format
Cable: MJ-A7SPF0003-050 (option)
Output: Radar, Auto Pilot,
Plotter, Scanning Sonar,
Current Indicator in AD-10 Format,
NMEA 0183 (IEC 61162)
Cable: MJ-A6SPF0007-100 (Inst. Mat. 1)
MJ-A6SPF0012-100 (Option)
MJ-A6SPF0003--050 (Option)
Input: Heading Sensor*, Gyrocompass* in
AD-10 Format, NMEA 0183 (IEC 61162)
Doppler Speed Log/Current Indicator
in NMEA0183 (IEC 61162)
Cable: MJ-A6SPF0003-100 (Option)
MJ-A6SPF0007-100 (Option)
MJ-A6SPF0012--050 (Option)
Output: Log Pulse.
Cable: MJ-A7SPF0003-050
(option)
Output: PC in NMEA 0183 (IEC 61162)
Cable: D-sub 9P
Output: PC in NMEA 0183 (IEC 61162)
Cable: D-sub 9P
* = The data of external heading must
come from type-approved sensor,
in case of SOLAS vessel.
External heading input format and output sentence
AD-10: Header of IEC 61162 data sentence chosen on menu is output.
IEC 61162: When EXT data is output from this equipment, NMEA Header (Identifier) of the
external data is output as it is without changes.
Processor unit, rear view
2.8 Installing the DGPS Beacon Receiver Kit
The optional DGPS beacon receiver provides DGPS capability. The beacon
receiver assy. is installed in the processor unit. A DGPS antenna is necessary.
DGPS Beacon Receiver Kit
Type: GR-7001-K Code No. 000-041-738
Name Type Code No. Qty Remarks
Antenna GR-8 000-040-660 1
Hose Clamp SS7200N 000-570-239 2
Spring Washer M10 000-864-261 1
DGPS Receiver Assy. SC-601 004-377-860 1
Cable Assy. TNCBPJ(140) 000-143-748 1 w/toothed washer and nut
PH Connector 20-061(7-6P) 004-377-770 1
Panhead Screw M3X8 000-881-404 4
DGPS Station List J49-80010 000-808-435 1
FAW-1.2 000-130-046
Whip Antenna
04S4176 000-112-845
1