Freescale Semiconductor 802.15.4 - Manual (Page 19)

Freescale Semiconductor Embedded Bootloader Reference Manual, Rev. 0.0 3-3
3.1.2 Using the View Menu Option
After clicking the View menu option, select port COMx and click “OK”. Choose the baud rate specified
for the current embedded application. See the Zigbee/802.15.4 Evaluation Kit Quick Start Guide,
AN2772/D, for a description of what to do for a specific application.
If no application is uploaded, you must use the default settings specified for the Embedded Bootloader.
See
Chapter 2 for more information.
NOTE
If the USB interface is used, the USB option appears as a new COM port.
Figure 4 View Menu Option