Normal use example (default), Flash erase disabled example, Normal use example (default) -9 – Freescale Semiconductor 802.15.4 User Manual
Page 25: Flash erase disabled example -9, 1 normal use example (default), 2 flash erase disabled example
Advertising
Freescale Semiconductor Embedded Bootloader Reference Manual, Rev. 0.0
3-9
3.2.1 Normal Use Example (Default)
Normal use example (default).
”Bootloader EVK_PTC_Demo.s19 /C:COM2 /B:19200 /-E /-A /-O /-S”
Figure 10 Command Line Version (Using Several Options)
NOTE
It is not possible to edit NVM data with the CMD version.
3.2.2 Flash Erase Disabled Example
Flash erase disabled example.
”Bootloader EVK_PTC_Demo.s19 /C:COM2 /B:19200 /E /-A /-O /-S ”
Figure 11 Command Line Version (Flash Erase Disable Option)
NOTE
The flash is not erased and a flash programming error is detected at
address 0xEFFE. This is the address of the Embedded Bootloader control
flags, which was not erased. The error message is expected.
Advertising