Porting to a specific target, Code and data segments, Standard libraries – Freescale Semiconductor 802.15.4 User Manual
Page 45: Compiler #defines, Porting to a specific target -3, Code and data segments -3, Standard libraries -3, Compiler #defines -3, 3 porting to a specific target, 1 code and data segments
Freescale Semiconductor Embedded Bootloader Reference Manual, Rev. 0.0
6-3
HW_Init.c
Hardware
init
functions
HW_Init.h
Init function prototypes and defines.
Reset_Vector.c
System
reset
vector.
main.c
Embedded Bootloader main function.
6.3 Porting to a Specific Target
This section provides guidelines on how to port the Embedded Bootloader to a specific PCB/target.
6.3.1 Code and Data Segments
The Embedded Bootloader must be linked with the linker file as specified in
. Several code
and data segments are listed and must not be changed. Refer to the map file as described in
for
more details.
6.3.2 Standard Libraries
The Embedded Bootloader must include the
ansiis.lib
from Metrowerks for a successful build. The
library is part of the Metrowerks CodeWarrior installation and is located in the following path:
[Install Folder]\Metrowerks\CodeWarrior CW08_V3.0\lib\HC08c\*.*
6.3.3 Compiler #defines
No compiler #defines are necessary.