Furuno 851 MARK-2 - Manual (Page 17)

1. MOUNTING
1-11
1.7 Mounting the Display Unit
The display unit is designed to be mounted on a tabletop.
1. Using the hanger as a template, mark screw locations in the mounting
location.
2. Fix the hanger to the mounting location with four 5 x 20 tapping screws
(supplied).
3. Fit the knob bolts to the display unit.
4. Install the display unit in the hanger.
5. Tighten the knob bolts securely.
*140
(5.51")
10
(0.39")
238
(9.37")
15
(0.59")
15
(0.59") *80
(3.15")
*80
(3.15")
100
(3.94")
20
(0.79")
268
(10.55")
130
(5.12")
4 -
∅
6
FIXING HOLES
* : SERVICING CLEARANCE
222(8.7")
236(9.3")
Cutout dimensions for flushmount
**
**
**: If the mounting location is
subject to heavy vibration,
fasten the display unit in the
hanger perpendicularly so that
it contacts the rubber cushions.
Figure 1-17 How to mount the display unit