FUJITSU T5140 - Manual (Page 53)

37
Managing Devices
This section contains information about managing devices in the servers, and the
multipathing software supported.
■ “Unconfigure a Device Manually” on page 37
■ “Reconfigure a Device Manually” on page 38
■ “Devices and Device Identifiers” on page 38
■ “SPARC Enterprise T5x40 Device Tree” on page 39
■ “Multipathing Software” on page 40
▼ Unconfigure a Device Manually
The ILOM firmware provides a set Device-Identifier component_state=
disabled
command, which enables you to unconfigure system devices manually.
This command marks the specified device as disabled. Any device marked disabled,
whether manually or by the system firmware, is removed from the system’s machine
description prior to transfer of control to other layers of system firmware, such as
OpenBoot PROM.
1. “Log In to ILOM” on page 2 .
2. At the ILOM -> prompt, type:
Related Information
■ “Reconfigure a Device Manually” on page 38
■ “Devices and Device Identifiers” on page 38
-> set Device-Identifier component_state=disabled