Frymaster FOOTPRINT 8195915 - Manual (Page 5)

1-1
PRO SERIES ELECTRIC FRYERS
CHAPTER 1: INTRODUCTION
1.1 General
Read the instructions in this manual thoroughly before attempting to operate this equipment. This
manual covers all configurations of FPPH-14, FPPH-17, and FPPH-22 models. The fryers in this
model family have most parts in common, and when discussed as a group, will be referred to as “Pro
Series Electric” fryers.
Although similar in appearance to the Footprint III family of Common Electric fryers, the Pro Series
Electric fryers feature a significantly different built-in filtration system. Other features, including
the deep cold-zones and open frypots with tilt-up elements remain essentially unchanged. Control
options include multi-product cooking computers (standard) or optional digital and analog
controllers. Fryers in this series come in full- or split-pot arrangements, and can be purchased as
single units or grouped in batteries of up to six fryers.
1.2 Safety Information
Before attempting to operate your unit, read the instructions in this manual thoroughly.
Throughout this manual, you will find notations enclosed in double-bordered boxes similar to the
one below.
DANGER
Hot cooking oil causes severe burns. Never attempt to move a fryer containing hot
cooking oil/shortening or to transfer hot cooking oil/shortening from one container
to another.
CAUTION boxes contain information about actions or conditions that may cause or result in a
malfunction of your system.
WARNING boxes contain information about actions or conditions that may cause or result in
damage to your system, and which may cause your system to malfunction.
DANGER boxes contain information about actions or conditions that may cause or result in
injury to personnel, and which may cause damage to your system and/or cause your system to
malfunction.
Fryers in this series are equipped with the following automatic safety features:
1. Two high-temperature detection features shut off power to the elements should the temperature
controls fail.
2. A safety switch built into the drain valve prevents the elements from heating with the drain valve
even partially open.