FUJITSU IMAGE SCANNER M3092DC - Manual (Page 44)

3-10 M3092DC Image Scanner Operation Guide
5) Adjust the document guides to the document width, then straighten
the documents. And, ajust the position of document stopper to the
document size (length).
If the documents are placed loosely between the left and right guides,
they may be read diagonally.
6) Switch the reading mode by pressing the Duplex button.
When the Function No. display panel is ON, the single -side reading
mode is active.
When the Function No. display panel blinks, the double -sided reading
mode is active.
7) Press the scan button on the main unit.
u Key point
Press the scan button to start the application software. The
Ι
mark
is displayed until the application starts.
If the application software does not start and the Function No.
display panel displays the Function No. again, the scan
processing is canceled.
8) After finishing reading, remove the documents from the Document
cover.