FUJITSU IMAGE SCANNER M3092DC - Manual (Page 62)

5-2 M3092DC Image Scanner Operation Guide
Problem Item to be Checked Correction
Reading does
not start (FB) Does the FB lamp turn on? When the device is used in a low
temperature environment, it may
happen that the FB lamp is difficult
to turn on. If the temperature is
low, try to scan again in warmer
place. If the place is sufficiently
heated, reboot the system and try
scanning again.
If the problem still persists, please
call our maintenance service center,
supplying the error code on the
screen.
Is half tone processing being
executed? Specify correct half tone processing
by using the main unit. Result of
reading graphics
and photographs
is unsatisfactory.
Is the interior of the document
bed, document guide and the
automatic document feeder clean? Clean them according to Section
4.3, "Cleaning."
Is half tone processing being
executed? Select binary (black and white)
processing by using the main unit. Results of
reading
characters and
diagrams are
unsatisfactory
Is the interior of the document
bed, document guide and the
automatic document feeder clean? Clean them according to Section
4.3, "Cleaning."
Images are
misaligned or
distorted. Are documents set straight on the
document support? Set the documents straight using
the document guides.
Is the pad clean? Clean the pad according to Section
4.3.2, "Cleaning the Automatic
Document Feeder." Double feeding
(*) occurs
frequently.
Is the pad worn? Replace the pad unit.