FUJITSU T1000 - Manual (Page 56)

30 SPARC Enterprise T1000 Server Installation Guide • April 2007
1. If this is the first time the system has been powered on, use the password
command to set the admin password.
After the admin password has been set, on subsequent reboots, the sc login prompt
is displayed.
2. Enter admin for the login name followed by your password.
▼ To Log In To the System Controller Using the
Network Management Port
The SC network management port is configured by default to retrieve network
settings through DHCP and allow connections using SSH.
After the network management port (NET MGT) has been assigned an IP address by
a DHCP server, you can connect to the ALOM CMT system controller using SSH.
.........................
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED
sc> password
password: Changing password for admin
Setting password for admin.
New password: new-password
Re-enter new password: new-password
sc>
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED
Please login: admin
Please Enter password: password
(Press Return twice)
sc>