FUJITSU T1000 - Manual (Page 65)

Chapter 3 Powering On the System 39
Booting the Solaris Operating System
The Solaris OS is preinstalled on the disk drive (for server configurations that
include a hard drive). The Solaris OS is not configured. If you boot the server from
this drive, you will be prompted to configure the Solaris OS for your environment.
▼ To Boot the Solaris Operating System
● Type the boot command at the ok prompt.
You must append a target to the disk path. For example, the target can be disk0 or a
device or network path.
In the following example, the server is booted from disk 0 (zero).
CODE EXAMPLE 3-3 Example of Server Boot from Disk 0
ok boot disk0
Boot device: /pci@7c0/pci@0/pci@8/scsi@2/disk@0,0
File and args:
Notice: Unimplemented procedure 'encode-unit' in
/pci@7c0/pci@0/pci@2/pci@0/LSILogic,sas@4
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,T1000/ufsboot
Loading: /platform/sun4v/ufsboot
....................
Hostname: wgs94-181
The system is coming up. Please wait.
NIS domain name is x.x.x.x
starting rpc services: rpcbind keyserv ypbind done.
Setting netmask of lo0 to 255.0.0.0
Setting netmask of bge0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4:
gateway xxxx
syslog service starting.
volume management starting.
Creating new rsa public/private host key pair
Creating new dsa public/private host key pair
The system is ready.
wgs94-181 console login: