Fisher & Paykel DD602I - Manual (Page 13)

Page DD_12
SECTION 4
PREFINISHED TOE KICK INSTALLATION
STEP 4.1 SETTING THE UPPER TOE KICK HEIGHT
4.1.1
Remove the Upper Toe Kick by opening
the bottom drawer, then holding the Toe
Kick at the base, pull outwards to unclip
and rotate up.
4.1.2
Ensure the screws are at the highest
position, so the Upper Toe Kick will be
situated on the DishDrawer as high as it
can go. This allows for later adjustment
to suit the Lower Toe Kick.
4.1.3
Replace the Upper Toe Kick by feeding
the top tabs up through the slots in the
tub, then rotate the Toe Kick to clip back
and lock home.
Ensure that the Transit
Packer located beneath
the upper Toe Kick has
been removed.
IMPORTANT
STEP 4.2 TRIMMING THE LOWER TOE KICK
4.2.1
The Lower Toe Kick sits flush with the
floor.
Turn the Lower Toe Kick upside down
and position at a 90° angle against the
already fitted Upper Toe Kick.
UP