Fisher & Paykel DD602I - Manual (Page 2)

Table of Contents
Section 1 General Information
1.1 Preparation
1.2 Product Specifications & Cavity Dimensions
1.3 Options for Installing Multiple Products
1.4 Electrical, Plumbing & Drainage Information
1.5 Product Parts
1.6 Additional Product Parts for Integrated DishDrawer
Section 2 Foot Slide Retainer Information
2.1 Assembling the Foot Slide Retainer
2.2 Securing the Foot Slide Retainer
Section 3 Fitting the DishDrawer
3.1 Connecting the Services
3.2 Flexible Extrusion Attachment for 24” by 34 1 /
2
” (610mm x 876mm) Cavity
3.3 Adjusting the Feet
3.4 Fitting the Endplate to the Chassis (Optional)
3.5 Securing the DishDrawer
Section 4 Prefinished Toe Kick Installation
4.1 Setting the Upper Toe Kick Height
4.2 Trimming the Lower Toe Kick
4.3 Trimming the Toe Kick Pins
4.4 Adjusting the Upper Toe Kick
Section 5 Information for Cabinet Maker for Integrated DishDrawer
5.1 Integrated Drawer Front & Toe Kick Dimensions
Section 6 Integrated Drawer Front Installation
6.1 Changing the Integrated Badge Enclosure
6.2 Disassembling the Integrated Badge
6.3 Assembling the Integrated Badge
6.4 Fitting the Badge, Handle & Mounting Panel to the Drawer Front
6.5 Fitting the Drawer Front Panels to the DishDrawer
Section 7 DishDrawer Toe Kick Information
7.1 Integrated Toe Kick Installation
Section 8 Final Checks
8.1 Installation Wet Test
8.2 Troubleshooting
Page DD_01