FieldServer NCA2-NFS2-3030 - Manual (Page 15)

FS-8700-130 Notifier NCA2/NFS-3030 Manual Page 15 of 21
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: [email protected]
Appendix C. Reference
Appendix C.1. Notifier NCA2/NFS2-3030 Message Types Recognized
Event Keyword Clearing Event Notes
FIRE ALARM
CLEARED FIRE
ALARM
states: {1,0}
SECURITY
ALARM (LIFE) CLEARED SECURITY
ALARM (LIFE) states: {1,0}
LIFE CRITICAL
ALARM
CLEARED LIFE
CRITICAL ALARM
states: {1,0}
MEDICAL
EMERGENCY CLEARED MEDICAL
EMERGENCY states: {1,0}
SECURITY
ALARM CLEARED SECURITY
ALARM states: {1,0}
CRITICAL
PROCESS
CRITICAL PROCESS
states: {1,0}
SUPERVISORY
CLEARED
SUPERVISORY states: {1,0}
TROUBLE/
FAULT CLEARED
TROUBLE/ FAULT States: [counter}
DISABLED
CLEARED
DISABLED states: {1,0}
PREALARM
CLEARED
PREALARM states: {1,0}
ACTIVE CLEARED ACTIVE states: {1,0}
ON/ OFF OFF states: {1,0}
SYSTEM
NORMAL
Resets all addresses in all memory areas but only if data is previously set
by driver and is not yet cleared by “Cleared” message and is configured
to Clear_on_Normal. By default Clear_on_Normal is “yes”.
SYSTEM RESET
Resets all addresses in all memory areas for a given Node but only if
data is previously set by driver and is not yet cleared by “Cleared”
message and is configured to Clear_on_Reset. By default
Clear_on_Reset is ‘no’.